Injen CAI/KRRH/3" Exhaust/RRC IM

Description

This is a good starting point for anyone with full Intake/Header/Exhaust setups using the stock injectors. It's based on the KRRH (SSR Replica) and the 3" Go Power exhaust.

Vehicle

Mods

VTEC Crossover

  • 3800

Rev Limit

  • 8700

Author

VitViper

Last updated date

01/22/2012 - 8:06pm

Login to Download

Comments

would it make a huge

would it make a huge difference if i had a sri and rbc instead of the rrc

Submitted by ddukk on Thu, 05/13/2010 - 12:17pm.

A bit, but not a whole lot.

A bit, but not a whole lot. Most cars will probably need minimal touch up to fuel on any of the cals we post.

Submitted by VitViper on Thu, 05/13/2010 - 1:35pm.

Just tried out this cal. It's

Just tried out this cal. It's much better then the base maps offered by Hondata. The A/F ratio was pretty spot on. I just have to do a slight touch up on the fuel tommorow. Thanks again VIt!

Submitted by ddukk on Thu, 05/13/2010 - 9:35pm.

This cal is tuned to about

This cal is tuned to about 12.6:1 a/f at WOT, but if you don't have the exact mods in the list (the car in question is mine and also has IMG, TBS spacer), the fueling may be off a tad.

Submitted by VitViper on Thu, 05/13/2010 - 9:39pm.

i have a password jdm

i have a password jdm powerchamber intake, dc sports race header, and full-race 3" exhaust....ne changes or suggestions or would this do ok for my setup?

Submitted by beatty1211 on Sun, 05/30/2010 - 7:49pm.

That sounds like something

That sounds like something you want to ask in the forums...

Submitted by VitViper on Sun, 05/30/2010 - 7:51pm.

i am still running a stock

i am still running a stock manifold, is it safe to use this calibration or do you recomend another?

09 fa5 - injen sri, krrh, skunk2 76mm tbs w/gaskets and flashpro.

Submitted by davek on Sat, 01/22/2011 - 9:08am.

will this calibration work

will this calibration work with injen sri, p2r tbs with gaskets, KRRH, and s2 3" ?

Submitted by davek on Sat, 01/29/2011 - 10:39am.

I have a FN2 with Mugen

I have a FN2 with Mugen airbox, Spoon 70mm TB, RRC, Toda RH and Feel's Honda Twincam cat-back. Is this a good base calibration for me?

Best regards

Submitted by max154 on Sun, 12/04/2011 - 5:34am.

could u use this Cal with my

could u use this Cal with my set up...Custom 3in intake, hondata IMG, krrh, skunk2 70mm exhaust.....

Submitted by eriki on Mon, 12/05/2011 - 10:52am.

stupid question VitViper but

stupid question VitViper but when it says last updated did u do something to the cal?? i recently uploaded this cal and just wondering if u changed anything ...

Submitted by juicyjoint316 on Thu, 01/26/2012 - 5:03pm.

would this work in my setup

would this work in my setup s270mm exhaust s2 megapower header rrc im & j35tb?

Submitted by jay.ong on Mon, 03/19/2012 - 6:26pm.

I have krrh, tsudo 70mm, and

I have krrh, tsudo 70mm, and injen cai. Is this a good base calibration for me to start?
Thank you!

Submitted by Pakin-CivicSI on Wed, 03/28/2012 - 8:24pm.