Comparison - 3 different calibrations

Notes

Just wondering if I could have these three datalogs plotted on the same chart. Separate charts will be ok.

The WOT pull is at or near the end of each datalog, sorry for the length. Thanks.

Author

GiantWinston

Last updated date

12/27/2011 - 6:23pm

Datalog

application/octet-stream icon1_trim.fpdl
application/octet-stream icon2_trim.fpdl
application/octet-stream icon3_trim.fpdl

Vehicle Details

  • 4.765 Final Drive
  • Civic Si
  • EP3
  • Other (add to passenger weight)

Passenger Weight

145 lbs

Target AFR

12.8

Vehicle Mods

  • Aftermarket Exhaust
  • Intake - CAI
  • Race Header

Comments

Re: Comparison - 3 different calibrations

Submitted by GiantWinston on Mon, 12/12/2011 - 3:18pm

looks like i typed the weight incorrectly. Stock weight, passenger weight 145 lbs.

Re: Comparison - 3 different calibrations

Submitted by VitViper on Thu, 12/15/2011 - 4:32pm

Re: Comparison - 3 different calibrations

Submitted by GiantWinston on Sat, 12/17/2011 - 1:04pm

Thanks Vit. Which datalog was that, 1, 2, or 3? Would it be possible to have the other datalogs graphed as well? I know the files are large but the WOT pulls are near the end. Sorry for the inconvenience.

Re: Comparison - 3 different calibrations

Submitted by VitViper on Mon, 12/19/2011 - 2:48pm

It's the first one

Re: Comparison - 3 different calibrations

Submitted by Mucter on Mon, 12/19/2011 - 2:50pm

@GiantWinston - If you want the logs to be compared, trim them down before uploading them. You can do this in FlashPro Manager before saving them.

Re: Comparison - 3 different calibrations

Submitted by GiantWinston on Tue, 12/27/2011 - 6:24pm

ok i have them trimmed. thanks again for doing this. One plot with all 3 datalogs or 3 separate plots is fine by me.