eDyno Requests

You can request an individual eDyno below from a 3rd or 4th gear pull datalog of your car. Please remember that these are completed as we have time.

Here are some tips on getting a good graph:

• Please only include one pull per request. What I'm looking for in the pull is 100% throttle (WOT) starting from 1800 rpm (or as low as you want to go) in 3rd or 4th gear (mainly high hp turbo cars) and running to fuel cut. Yes, this means taking your car to a low rpm in 3rd or 4th gear and FLOORING IT til either you hit the rpm you want to stop at (say 8500), or you hit the rev limiter, and then letting off. Posting a log with you at very low throttle will not graph well (read: low power, car is accelerating slowly at low throttle), and will get skipped without any comments. Also wavering throttle (letting off and then going back into throttle) momentarily in the pull is not advised, will not graph well, and your request may be skipped.
• DO NOT datalog using a laptop. Create your pull by datalogging with the FlashPro only with the datalog rate at maximum to 'Fast'. Then save the datalog off the FlashPro using your PC/Laptop. This results in WAY better graphs.
• Make sure you use a flat and smooth road. Bumps in the road will get translated into the graphs. Hold the steering wheel straight, any turns will also mess with the graph.
• Do NOT post a datalog of you romping through the gears. As interesting as this is to see, I cannot graph it and your request will get skipped.

I like graphing the requests as I enjoy seeing what different cars (and setups) put out on the street, but I also have very limited time to graph the requests. So the easier you make it for me to graph it, the more likely I will take the time to do so.

If you are in a hurry, please consider a monthly subscription for unlimited direct access to the eDyno. It's only $10 for one month of unlimited graphs!

Add new eDyno Request